RP30 System Program (Ver.1.1.0)

Update history
[ Ver.1.1.0 ] JAN 2019
Functionality Improvement
  • Improvements were made to the Bright Piano tone.

What you will need to update your RP30
  • RP30
  • USB Cable
  • A computer ( Windows 7, Windows 10 )

Cautions with the update
  • Never power-off your while the update is in progress!
    If a power failure or similar accident occurs during the update process, the won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
Download the file named "".
It is an archive file in zip format, please double click on the file to expand.
On expansion, a folder named rp30_sys_v110 containing the following files appears.
  • Comm Firmware Update Setup V2.6.exe
    Update Tool
  • RP30-V1.1.0-1122.DAT
    Update File
  • RP30_Firmware_Update_Manual.pdf
    Update Manual

Procedure for the update
Read "RP30 Firmware Update Manual" (RP30_Firmware_Update_Manual.pdf) and carry out the procedure.

Note: Do not disconnect the power supply or turn off RP30 during the update!
Note: The progress bar may repeat several times before the update is finished.
Note: The required time for update is around 25minutes.

* If the update is unsuccessful, carry out the procedure in "3. Firmware Update" a second time.


Quick Links